"How to turn on, use and turn off the MSCW hall PA"

How to turn on, use and turn off the MSCW hall PA.

Setting up and Turning on:

1. Turn on the light switch on the right hand side of the wall.

2. Turn on the four switches, located on the right hand side of the bottom cupboard.

3. Turn on both power AMPS.

4. Turn both the power AMPS dials so there facing three o'clock.

5. Turn the 2 master faders up to 0.

Operating:

1. Take out the mic, located in the cupboards above of the mixing table.

2. Switch on the mic and turn the fader up to 0.

3. Set up mic stands and position them where you want them to stand.

4. Set up the lectern mic located stage west and stage east.

5. Turn the lectern mic faders to 0.

6. Check the mic is working correctly and clearly by testing the mic.

7. Check that the phantom power is switched on.

Turning Off:

1. Switch off all microphones.

2. Turn down all microphone faders.

3. Turn the master faders down.

4. Turn the dials located on AMP to zero.

5. Switch the AMP switches off.

6. Pack up all microphones and microphone stands carfully, and storing them in the bio box cupboards above.

7. Turn the light off in the bio box