Work Placement: States Sport Centre (Teen Matters and Sexuality)

The event was held at The States Sport Center at Homebush, the event was about teen matters, relationships and sexuality, schools throughout Sydney where invited and the catholic school association organised the event. The entertainment girls and Burwood high students where to usher 2,000 teenagers and 21 schools to their seats in a safe and professional order, we worked for seven hours with breaks in between. I learn't that you must stay calm and patient with dealing with large amounts of people and that when performing task and roles you must act in a positive and professional way as many people are watching and commenting on your behavior. Our teamwork was 100% however communication could have improved. Overall the day was very successful and enjoyable, it was good to learn about other roles such as OHS in the entertainment industry. If i were to rate the day it would be 9 out of 10.

Signal Flow Chart, Packing Sheet and Floor Plan

Signal Flow Chart.

Packing Sheet.

Janes Disco Floor Plan.

"How to turn on, use and turn off the MSCW hall PA"

How to turn on, use and turn off the MSCW hall PA.

Setting up and Turning on:

1. Turn on the light switch on the right hand side of the wall.

2. Turn on the four switches, located on the right hand side of the bottom cupboard.

3. Turn on both power AMPS.

4. Turn both the power AMPS dials so there facing three o'clock.

5. Turn the 2 master faders up to 0.

Operating:

1. Take out the mic, located in the cupboards above of the mixing table.

2. Switch on the mic and turn the fader up to 0.

3. Set up mic stands and position them where you want them to stand.

4. Set up the lectern mic located stage west and stage east.

5. Turn the lectern mic faders to 0.

6. Check the mic is working correctly and clearly by testing the mic.

7. Check that the phantom power is switched on.

Turning Off:

1. Switch off all microphones.

2. Turn down all microphone faders.

3. Turn the master faders down.

4. Turn the dials located on AMP to zero.

5. Switch the AMP switches off.

6. Pack up all microphones and microphone stands carfully, and storing them in the bio box cupboards above.

7. Turn the light off in the bio box